Contact Us
+8613923889456
+8675529885008
Xiansha Industry Zone,Hongtian Road,Xingqiao Street,Baoan Distric,Shenzhen,China
LED T8 TUBE Type AB

4ft LED T8 TUBE 18W Type AB

Part No.:EDI-APT8-4F16-AB
Power:18 W
Dimensions:4ft
Luminous Flux:2340lm 
Efficacy:130lm/W
Input:100-277ACV
Certificates:UL, DLC
INQUIRY
Description

Product Features
1. Plug & Play Compatible electronic ballast & ballast bypass direct wire, Single-End or Double-End Input.
2. Very high-power efficiency 130lm/w-150lm/W and high CRI which can reach above 80.
3. Built-in aluminum radiator to ensure the stability of LED lamp beads working temperature!
4. Optimum light uniformity and high color homogeneity.
5. Overpower, short and open circuit protected.
6. Long lifetime: 50,000 hours with 3-5 years warranty.
7. NO noise, NO UV and IR, Mercury-free and RoHS compliant.
8. Comply with CE, FCC, Ul and DLC standards.
9. Fire - resisting sleeves: UL94 V0 level, high temperature resistant, thermal-insulation, inflaming retarding.

Physical Specifications

Module EDI-APT8-4F16-AB
Length 1200mm/4ft
Weight 260g
Housing Aluminum Base + PC Cover
Lens Milky/Clear
Tube Diameter 26mm
Base Type G13/Rotatable
Work Environment Indoor use
Electrical Specifications
Module EDI-APT8-4F16-AB
LED Quantity 120
Power Consumption 18W±1W
Input Voltage 100-277ACV
Driver Internal driver
Power Factor >0.95
Light Source SMD 2835
Operation Temperature -20~40 °C

Optical Specifications

Module EDI-APT8-4F16-AB
Power Consumption 18W±1W
Lumens 2340lm
Luminous Efficiency 130lm/W
Certificate UL DLC
Color Temperature
Warm White: 2800K-3200K
Natural White: 3800K-4200K 4700K-5300K
Cool White: 5700K-6200K
CRI >80
Beam Angle 120 Degree

Installation Guide

Retrofit procedure
1. Turn off the power to the light fixture at the breaker panel before installation.
2. Open the diffuser from the light fixture.
3. Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
4.Cut the wires shown as the diagram below.
5. Make the new wire connect to branch circuit shown as the diagram below.
6. Replace the cover over the wiring channel.
7. Install the LED tubes, close the diffuser.
 
8. Turn on the Power.

Warranty
    This product has a warranty of period of 5 years from the date of purchase. The warranty is invalid in the case of improper use, installation, tampering or removal of the Q.C. and/or date label, usage in improper working environment or installation not according to the current edition of the National Electric Code. Should this product fail during the warranty period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Manufacturer does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Manufacturer reserves the right to alter specifications without prior notice. 
Packing / weight

Module
Qty/Ctn
(pcs)
Outer box
(in)
G.W/Ctn
(lbs.)
EDI-APT8-4F16-AB 25 48.6x7.28x7.28 15.43